Effects of Shock Peak Stress and Pulse Duration on Spall Damage of NbTiZr Medium-Entropy Alloy

LUO Xiaoping; LI Xuhai; TANG Zeming; LI Zhiguo; CHEN Sen; WANG Yuan; YU Yuying; HU Jianbo

doi:10.11858/gywlxb.20240771

Volume 38 Issue 6

Nov 2024

Turn off MathJax

Article Contents

Abstract

References

Chinese Journal of High Pressure Physics > 2024 > 38(6): 064101.

GUO Junfeng, ZENG Qingxuan, LI Mingyu, YU Qingxia. Short Pulse Shock Initiation Criteria for HNS-Ⅳ Explosive[J]. Chinese Journal of High Pressure Physics, 2018, 32(2): 025101. doi: 10.11858/gywlxb.20170582

Citation:

LUO Xiaoping, LI Xuhai, TANG Zeming, LI Zhiguo, CHEN Sen, WANG Yuan, YU Yuying, HU Jianbo. Effects of Shock Peak Stress and Pulse Duration on Spall Damage of NbTiZr Medium-Entropy Alloy[J]. Chinese Journal of High Pressure Physics, 2024, 38(6): 064101. doi: 10.11858/gywlxb.20240771

Citation:

PDF( 6338 KB)

Effects of Shock Peak Stress and Pulse Duration on Spall Damage of NbTiZr Medium-Entropy Alloy

doi: 10.11858/gywlxb.20240771

LUO Xiaoping^1
,,
LI Xuhai¹,
TANG Zeming²,
LI Zhiguo¹,
CHEN Sen¹,
WANG Yuan¹,
YU Yuying^{1,*
,
,},
HU Jianbo^{1,*
,
,}

1.
National Key Laboratory of Shock Wave and Detonation Physics, Institute of Fluid Physics, CAEP, Mianyang 621999, Sichuan, China
2.
State Key Laboratory for Environmentally Friendly Energy Materials, Southwest University of Science and Technology, Mianyang 621010, Sichuan, China

Received Date: 01 Apr 2024
Rev Recd Date: 06 May 2024

Available Online: 12 Jul 2024

Issue Publish Date: 05 Dec 2024

Abstract

Abstract

Dynamic mechanical behaviors of high entropy alloys (HEAs) or medium-entropy alloys (MEAs) have attracted significant attention due to their exceptional strength-toughness balance and promising potential applications in extreme conditions. This work investigates the effects of peak shock stress and pulse duration on the spall damage of the NbTiZr MEA under dynamic shock loading. Peak shock stresses, pulse durations and spall strengths are determined by analyzing free surface velocity profiles, with postmortem microstructural analysis to reveal the underlying deformation and failure mechanisms. The measured spall strength of NbTiZr MEA ranges from 3.77 GPa to 4.80 GPa, showing minimal dependence on the peak shock stress but high sensitivity to the pulse duration. Furthermore, the damage morphologies are significantly influenced by pulse durations. The damage is recognized as a quasi-cleavage fracture mode. No phase transition or deformation twins are observed within the recovered NbTiZr alloy.
- NbTiZr,
- spall damage,
- shock loading history,
- microstructure

FullText(HTML)

References(40)

References

[1]	MIRACLE D B, SENKOV O N. A critical review of high entropy alloys and related concepts [J]. Acta Materialia, 2017, 122: 448–511. doi: 10.1016/j.actamat.2016.08.081
[2]	LI W D, XIE D, LI D Y, et al. Mechanical behavior of high-entropy alloys [J]. Progress in Materials Science, 2021, 118: 100777. doi: 10.1016/j.pmatsci.2021.100777
[3]	ZHANG Y, ZUO T T, TANG Z, et al. Microstructures and properties of high-entropy alloys [J]. Progress in Materials Science, 2014, 61: 1–93. doi: 10.1016/j.pmatsci.2013.10.001
[4]	CHEN X F, WANG Q, CHENG Z Y, et al. Direct observation of chemical short-range order in a medium-entropy alloy [J]. Nature, 2021, 592(7856): 712–716. doi: 10.1038/s41586-021-03428-z
[5]	JIAN W R, XIE Z C, XU S Z, et al. Effects of lattice distortion and chemical short-range order on the mechanisms of deformation in medium entropy alloy CoCrNi [J]. Acta Materialia, 2020, 199: 352–369. doi: 10.1016/j.actamat.2020.08.044
[6]	XUN K H, ZHANG B Z, WANG Q, et al. Local chemical inhomogeneities in TiZrNb-based refractory high-entropy alloys [J]. Journal of Materials Science & Technology, 2023, 135: 221–230. doi: 10.1016/J.JMST.2022.06.047
[7]	ZHANG R P, ZHAO S T, DING J, et al. Short-range order and its impact on the CrCoNi medium-entropy alloy [J]. Nature, 2020, 581(7808): 283–287. doi: 10.1038/s41586-020-2275-z
[8]	LIU D, YU Q, KABRA S, et al. Exceptional fracture toughness of CrCoNi-based medium- and high-entropy alloys at 20 kelvin [J]. Science, 2022, 378(6623): 978–983. doi: 10.1126/science.abp8070
[9]	HE J Y, WANG Q, ZHANG H S, et al. Dynamic deformation behavior of a face-centered cubic FeCoNiCrMn high-entropy alloy [J]. Science Bulletin, 2018, 63(6): 362–368. doi: 10.1016/j.scib.2018.01.022
[10]	GLUDOVATZ B, HOHENWARTER A, CATOOR D, et al. A fracture-resistant high-entropy alloy for cryogenic applications [J]. Science, 2014, 345(6201): 1153–1158. doi: 10.1126/science.1254581
[11]	YE Y X, LIU C Z, WANG H, et al. Friction and wear behavior of a single-phase equiatomic TiZrHfNb high-entropy alloy studied using a nanoscratch technique [J]. Acta Materialia, 2018, 147: 78–89. doi: 10.1016/j.actamat.2018.01.014
[12]	SU Z Q, QUAN Z D, SHEN T L, et al. A novel BCC-structure Zr-Nb-Ti medium-entropy alloys (MEAs) with excellent structure and irradiation resistance [J]. Materials, 2022, 15(19): 6565. doi: 10.3390/ma15196565
[13]	CANTOR B, CHANG I T H, KNIGHT P, et al. Microstructural development in equiatomic multicomponent alloys [J]. Materials Science and Engineering: A, 2004, 375: 213–218. doi: 10.1016/j.msea.2003.10.257
[14]	WU S J, WANG X D, LU J T, et al. Room-temperature mechanical properties of V₂₀Nb₂₀Mo₂₀Ta₂₀W₂₀ high-entropy alloy [J]. Advanced Engineering Materials, 2018, 20(7): 1800028. doi: 10.1002/adem.201800028
[15]	HU S W, LI T J, SU Z Q, et al. A novel TiZrNb medium entropy alloy (MEA) with appropriate elastic modulus for biocompatible materials [J]. Materials Science and Engineering: B, 2021, 270: 115226. doi: 10.1016/j.mseb.2021.115226
[16]	HU S W, LI T J, LI X, et al. Electrochemical behavior, passive film characterization and in vitro biocompatibility of Ti-Zr-Nb medium-entropy alloys [J]. Journal of Materials Science, 2023, 58(2): 946–960. doi: 10.1007/s10853-022-08128-1
[17]	HU S W, LI T J, LI Q L, et al. Microstructure evolution, deformation mechanism, and mechanical properties of biomedical TiZrNb medium entropy alloy processed using equal channel angular pressing [J]. Intermetallics, 2022, 151: 107725. doi: 10.1016/j.intermet.2022.107725
[18]	HU S W, LI T J, SU Z Q, et al. Research on suitable strength, elastic modulus and abrasion resistance of Ti-Zr-Nb medium entropy alloys (MEAs) for implant adaptation [J]. Intermetallics, 2022, 140: 107401. doi: 10.1016/j.intermet.2021.107401
[19]	ELETI R R, STEPANOV N, YURCHENKO N, et al. Cross-kink unpinning controls the medium- to high-temperature strength of body-centered cubic NbTiZr medium-entropy alloy [J]. Scripta Materialia, 2022, 209: 114367. doi: 10.1016/j.scriptamat.2021.114367
[20]	SENKOV O N, RAO S, CHAPUT K J, et al. Compositional effect on microstructure and properties of NbTiZr-based complex concentrated alloys [J]. Acta Materialia, 2018, 151: 201–215. doi: 10.1016/j.actamat.2018.03.065
[21]	ZHAO L, ZONG H X, DING X D, et al. Anomalous dislocation core structure in shock compressed bcc high-entropy alloys [J]. Acta Materialia, 2021, 209: 116801. doi: 10.1016/j.actamat.2021.116801
[22]	THOMAS S A, HAWKINS M C, MATTHES M K, et al. Dynamic strength properties and alpha-phase shock Hugoniot of iron and steel [J]. Journal of Applied Physics, 2018, 123(17): 175902. doi: 10.1063/1.5019484
[23]	CUI Y H, CAI J C, LI Z G, et al. Effect of porosity on dynamic response of additive manufacturing Ti-6Al-4V alloys [J]. Micromachines, 2022, 13(3): 408. doi: 10.3390/mi13030408
[24]	JIAO Z Y, LI Z G, WU F C, et al. Phase transition, twinning, and spall damage of NiTi shape memory alloys under shock loading [J]. Materials Science and Engineering: A, 2023, 869: 144775. doi: 10.1016/j.msea.2023.144775
[25]	ZHANG Z G, CHEN S, HONG Y F, et al. Multi-scale damage mechanism of hierarchically structured high-strength martensitic steels under shock loading [J]. International Journal of Plasticity, 2024, 175: 103945. doi: 10.1016/j.ijplas.2024.103945
[26]	KANEL G I. Spall fracture: methodological aspects, mechanisms and governing factors [J]. International Journal of Fracture, 2010, 163(1/2): 173–191. doi: 10.1007/s10704-009-9438-0
[27]	DAVISON L. Spall fracture [M]//Fundamentals of Shock Wave Propagation in Solids. Berlin, Heidelberg: Springer, 2008: 317–342.
[28]	ANTOUN T, CURRAN D R, RAZORENOV S V, et al. Spall fracture [M]. New York: Springer, 2003.
[29]	CHEVRIER P, KLEPACZKO J R. Spall fracture: mechanical and microstructural aspects [J]. Engineering Fracture Mechanics, 1999, 63(3): 273–294. doi: 10.1016/S0013-7944(99)00022-3
[30]	周洪强, 张凤国, 潘昊, 等. 材料层裂研究的主要进展 [J]. 高压物理学报, 2019, 33(5): 050301. doi: 10.11858/gywlxb.20180670 ZHOU H Q, ZHANG F G, PAN H, et al. Main progress in research on material spalling [J]. Chinese Journal of High Pressure Physics, 2019, 33(5): 050301. doi: 10.11858/gywlxb.20180670
[31]	谭华. 实验冲击波物理 [M]. 北京: 国防工业出版社, 2018: 45−46, 64−65, 269−271. TAN H. Experimental shock wave physics [M]. Beijing: National Defense Industry Press, 2018: 45−46, 64−65, 269−271.
[32]	蔡洋, 李超, 卢磊. 冲击载荷下金属材料的微结构-加载特性-层裂响应关系概述 [J]. 高压物理学报, 2021, 35(4): 040104. doi: 10.11858/gywlxb.20200648 CAI Y, LI C, LU L. Effects of microstructure and loading characteristics on spallation of metallic materials under shock loading [J]. Chinese Journal of High Pressure Physics, 2021, 35(4): 040104. doi: 10.11858/gywlxb.20200648
[33]	LI C, YANG K, TANG X C, et al. Spall strength of a mild carbon steel: effects of tensile stress history and shock-induced microstructure [J]. Materials Science and Engineering: A, 2019, 754: 461–469. doi: 10.1016/j.msea.2019.03.019
[34]	GLUZMAN V D, KANEL G I. Measurement of the tensile stresses behind a spalling plane [J]. Journal of Applied Mechanics and Technical Physics, 1984, 24(4): 582–585. doi: 10.1007/BF00907912
[35]	ROMANCHENKO V I, STEPANOV G V. Dependence of the critical stresses on the loading time parameters during spall in copper, aluminum, and steel [J]. Journal of Applied Mechanics and Technical Physics, 1980, 21(4): 555–561. doi: 10.1007/BF00916495
[36]	ZHANG N B, XU J, FENG Z D, et al. Shock compression and spallation damage of high-entropy alloy Al_0.1CoCrFeNi [J]. Journal of Materials Science & Technology, 2022, 128: 1–9. doi: 10.1016/j.jmst.2022.02.056
[37]	CUI A R, HU S C, ZHANG S, et al. Spall response of medium-entropy alloy CrCoNi under plate impact [J]. International Journal of Mechanical Sciences, 2023, 252: 108331. doi: 10.1016/j.ijmecsci.2023.108331
[38]	CHENG J C, QIN H L, LI C, et al. Deformation and damage of equiatomic CoCrFeNi high-entropy alloy under plate impact loading [J]. Materials Science and Engineering: A, 2023, 862: 144432. doi: 10.1016/j.msea.2022.144432
[39]	ZHANG N B, TANG Z J, LIN Z H, et al. Deformation and damage of heterogeneous-structured high-entropy alloy CrMnFeCoNi under plate impact [J]. Materials Science and Engineering: A, 2022, 843: 143069. doi: 10.1016/j.msea.2022.143069
[40]	QI M L, BIE B X, ZHAO F P, et al. A metallography and X-ray tomography study of spall damage in ultrapure Al [J]. AIP Advances, 2014, 4(7): 077118. doi: 10.1063/1.4890310

Relative Articles

[1]	ZHANG Dingshan, ZHANG Bo, FU Liang, XU Xiao, LI Pengfei. Influence of Penetration Deflection by the Shape of Tail Oblique Cone of Projectile[J]. Chinese Journal of High Pressure Physics, 2024, 38(1): 015101. doi: 10.11858/gywlxb.20230728
[2]	XIN Jianting, XI Tao, FAN Wei, HE Weihua, LI Gang, ZHAO Yongqiang, SHUI Min, CHU Genbai. The Spallation Characteristics of Al under Ultra-High Strain Rate Loading Driven by Femtosecond Laser[J]. Chinese Journal of High Pressure Physics, 2022, 36(3): 034102. doi: 10.11858/gywlxb.20210904
[3]	LIU Yi, LI Jianming, ZHOU Zhongyu, PENG Hui, SONG Zhenfei, GU Zhuowei. Compression Stability of Multi-Layer Composite Close-Wound Solenoid Driven by Explosive Implosion[J]. Chinese Journal of High Pressure Physics, 2020, 34(6): 063301. doi: 10.11858/gywlxb.20200571
[4]	LU Yu, GU Zhuo-Wei. One-Dimensional Magneto-Hydrodynamics Calculation and Analysis of Implosion Magnetic Flux Compression Process[J]. Chinese Journal of High Pressure Physics, 2017, 31(4): 419-425. doi: 10.11858/gywlxb.2017.04.010
[5]	ZHANG Li, LI Mu, ZHANG Yong-Qiang, HE Jia, SHEN Huan-Huan, TAO Yan-Hui, TAN Fu-Li, ZHAO Jian-Heng. Experimental Investigation of Mixing Processof Laser-Driven Single Granule with Gas[J]. Chinese Journal of High Pressure Physics, 2017, 31(2): 187-192. doi: 10.11858/gywlxb.2017.02.012
[6]	ZHAO Ji-Bo, SUN Cheng-Wei, LUO Bin-Qiang, WANG Gui-Ji, CAI Jin-Tao, TAN Fu-Li. Numerical Analysis on Physical Quantities of Aluminum in Magnetically Driven Isentropic Compression Experiments[J]. Chinese Journal of High Pressure Physics, 2015, 29(4): 279-285. doi: 10.11858/gywlxb.2015.04.007
[7]	CAI Jin-Tao, WANG Gui-Ji, ZHANG Hong-Ping, ZHAO Feng, WU Gang, TAO Yan-Hui. Mechanical Response of Fluorine Rubble F₂₃₁₁ under Quasi-Isentropic Compression[J]. Chinese Journal of High Pressure Physics, 2015, 29(1): 42-46. doi: 10.11858/gywlxb.2015.01.007
[8]	ZHANG Hong-Ping, LI Mu, KAN Ming-Xian, WANG Gang-Hua, CHONG Tao. Mechanical and Thermal Dissipation Analysis of Aluminum in Quasi-Isentropic Compression[J]. Chinese Journal of High Pressure Physics, 2015, 29(3): 169-177. doi: 10.11858/gywlxb.2015.03.002
[9]	WANG Fei, CHEN Lang, WU Jun-Ying, SUN Cui-Yuan. Theoretical Calculation and Experimental Investigation of Multi-Layer Flyer Driven by Pulsed Laser Beam[J]. Chinese Journal of High Pressure Physics, 2014, 28(4): 489-497. doi: 10.11858/gywlxb.2014.04.016
[10]	WANG Gang-Hua, WANG Gui-Ji, KAN Ming-Xian, ZHANG Hong-Ping, SUN Cheng-Wei, ZHAO Jian-Heng, TAN Fu-Li. Magnetically Driven Isentropic Compression of 45 Steel[J]. Chinese Journal of High Pressure Physics, 2014, 28(6): 705-708. doi: 10.11858/gywlxb.2014.06.010
[11]	ZHANG Hong-Ping, WANG Gui-Ji, LI Mu, ZHAO Jian-Heng, SUN Cheng-Wei, TAN Fu-Li, MO Jian-Jun, ZHU Wen-Jun. Yield Strength Analysis of Tantalum in Quasi-Isentropic Compression[J]. Chinese Journal of High Pressure Physics, 2011, 25(4): 321-326 . doi: 10.11858/gywlxb.2011.04.006
[12]	LI Mu, SUN Cheng-Wei, ZHAO Jian-Heng, LUO Zhen-Xiong, ZHONG Jie. Conditions Analysis of Laser-Driven Plasma Jet[J]. Chinese Journal of High Pressure Physics, 2011, 25(4): 351-358 . doi: 10.11858/gywlxb.2011.04.011
[13]	CAI Jin-Tao, WANG Gui-Ji, ZHAO Jian-Heng, MO Jian-Jun, WENG Ji-Dong, WU Gang, ZHAO Feng. Magnetically Driven Quasi-Isentropic Compression Experiments of Solid Explosives[J]. Chinese Journal of High Pressure Physics, 2010, 24(6): 455-460 . doi: 10.11858/gywlxb.2010.06.009
[14]	WANG Gui-Ji, TAN Fu-Li, SUN Cheng-Wei, ZHAO Jian-Heng, WANG Gang-Hua, MO Jian-Jun, ZHANG Ning, WANG Xiao-Song, WU Gang, HAN Mei. Compression Isentropes of Copper and Aluminum under 40 GPa[J]. Chinese Journal of High Pressure Physics, 2009, 23(4): 266-270 . doi: 10.11858/gywlxb.2009.04.005
[15]	WANG Gang-Hua, BAI Jin-Song, SUN Cheng-Wei, MO Jian-Jun, WANG Gui-Ji, ZHAO Jian-Heng, TAN Fu-Li, HU Xi-Jing. Backward Integration Method for Tracing Isentropic Compression Field[J]. Chinese Journal of High Pressure Physics, 2008, 22(2): 149-152 . doi: 10.11858/gywlxb.2008.02.007
[16]	GU Zhuo-Wei, ZHANG Xing-Wei, SUN Cheng-Wei. Experimental Research on the Characters of Laser-Driven Macro-Flyers[J]. Chinese Journal of High Pressure Physics, 2008, 22(1): 103-107 . doi: 10.11858/gywlxb.2008.01.022
[17]	JIANG Shao-En, YANG Jia-Min, DING Yao-Nan, LIU Yong-Gang, HU Xin. Investigation on Shock and Heat Waves in Aluminum Irradiated by Laser[J]. Chinese Journal of High Pressure Physics, 2000, 14(4): 264-268 . doi: 10.11858/gywlxb.2000.04.005
[18]	HUA Jin-Song, JING Fu-Qian, GONG Zi-Zheng, TAN Hua, XU Nan-Xian, DONG Yu-Bin, CHEN Dong-Quan. Study of Numerical Simulation for Quasi-Isentropic Compression[J]. Chinese Journal of High Pressure Physics, 2000, 14(3): 195-202 . doi: 10.11858/gywlxb.2000.03.007
[19]	ZHUANG Shi-Ming, WANG Chun-Yan, LUO Fu, SUN Cheng-Wei. Spallation of Aluminum Targets Irradiated by Pulsed Laser Beam[J]. Chinese Journal of High Pressure Physics, 1993, 7(1): 61-65 . doi: 10.11858/gywlxb.1993.01.009
[20]	DING Feng, HUANG Shi-Hui, JING Fu-Qian, DONG Yu-Bin, LI Ze-Ren. Experimental Studies on the Dynamic Quasi-Isentropic Compression of Oxygen Free-Copper[J]. Chinese Journal of High Pressure Physics, 1990, 4(2): 150-156 . doi: 10.11858/gywlxb.1990.02.012

Supplements(0)

Cited By

Proportional views

Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Figures(7) / Tables(1)

Get Citation

PDF

XML

Article Metrics

Article views(191) PDF downloads(30)

Effects of Shock Peak Stress and Pulse Duration on Spall Damage of NbTiZr Medium-Entropy Alloy

doi: 10.11858/gywlxb.20240771

Abstract

References

Relative Articles

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Proportional views

Related

Effects of Shock Peak Stress and Pulse Duration on Spall Damage of NbTiZr Medium-Entropy Alloy

doi: 10.11858/gywlxb.20240771

Abstract

References

Relative Articles

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Proportional views

Related

Export File

Citation

Format

Content