Citation: | XU Ke, SHENG Jie, LIU Yu, HUANG Houbing, SHI Xiaoming, SONG Haifeng. Insight into Dynamic Recrystallization of AZ31B Magnesium Alloys by Phase-Field Simulations[J]. Chinese Journal of High Pressure Physics, 2024, 38(3): 030105. doi: 10.11858/gywlxb.20230780 |
[1] |
谭叶, 肖元陆, 薛桃, 等. 镁铝合金的冲击熔化行为实验研究 [J]. 高压物理学报, 2019, 33(2): 020106. doi: 10.11858/gywlxb.20190729
TAN Y, XIAO Y L, XUE T, et al. Melting of MB2 alloy under shock compression [J]. Chinese Journal of High Pressure Physics, 2019, 33(2): 020106. doi: 10.11858/gywlxb.20190729
|
[2] |
李定远, 朱志武, 卢也森. 冲击加载下42CrMo钢的动态力学性能及其本构关系 [J]. 高压物理学报, 2017, 31(6): 761–768. doi: 10.11858/gywlxb.2017.06.011
LI D Y, ZHU Z W, LU Y S. Mechanical properties and constitutive relation for 42CrMo steel under impact load [J]. Chinese Journal of High Pressure Physics, 2017, 31(6): 761–768. doi: 10.11858/gywlxb.2017.06.011
|
[3] |
潘建华, 陈学东, 姜恒, 等. 准静态和动态加载对裂纹扩展阻力曲线的影响及其关系的研究 [J]. 高压物理学报, 2015, 29(2): 109–116. doi: 10.11858/gywlxb.2015.02.004
PAN J H, CHEN X D, JIANG H, et al. Loading rate effect on crack resistance curves and their correlations [J]. Chinese Journal of High Pressure Physics, 2015, 29(2): 109–116. doi: 10.11858/gywlxb.2015.02.004
|
[4] |
MALIK A, WANG Y W, CHENG H W, et al. Post deformation analysis of the ballistic impacted magnesium alloys, a short-review [J]. Journal of Magnesium and Alloys, 2021, 9(5): 1505–1520. doi: 10.1016/j.jma.2020.07.011
|
[5] |
MEDVEDEV A E, MACONACHIE T, LEARY M, et al. Perspectives on additive manufacturing for dynamic impact applications [J]. Materials & Design, 2022, 221: 110963. doi: 10.1016/j.matdes.2022.110963
|
[6] |
NAZEER F, LONG J Y, YANG Z, et al. Superplastic deformation behavior of Mg alloys: a-review [J]. Journal of Magnesium and Alloys, 2022, 10(1): 97–109. doi: 10.1016/j.jma.2021.07.012
|
[7] |
XU W L, YU J M, JIA L C, et al. Deformation behavior of Mg-13Gd-4Y-2Zn-0.5Zr alloy on the basis of LPSO kinking, dynamic recrystallization and twinning during compression-torsion [J]. Materials Characterization, 2021, 178: 111215. doi: 10.1016/j.matchar.2021.111215
|
[8] |
MALIK A, NAZEER F, NAQVI S Z H, et al. Microstructure feathers and ASB susceptibility under dynamic compression and its correlation with the ballistic impact of Mg alloys [J]. Journal of Materials Research and Technology, 2022, 16: 801–813. doi: 10.1016/j.jmrt.2021.12.051
|
[9] |
MALIK A, WANG Y W. A short review on high strain rate superplasticity in magnesium-based composites materials [J]. International Journal of Lightweight Materials and Manufacture, 2023, 6(2): 214–224. doi: 10.1016/j.ijlmm.2022.10.004
|
[10] |
HE M F, CHEN L X, YIN M, et al. Review on magnesium and magnesium-based alloys as biomaterials for bone immobilization [J]. Journal of Materials Research and Technology, 2023, 23: 4396–4419. doi: 10.1016/j.jmrt.2023.02.037
|
[11] |
DONG J H, LIN T, SHAO H P, et al. Advances in degradation behavior of biomedical magnesium alloys: a review [J]. Journal of Alloys and Compounds, 2022, 908: 164600. doi: 10.1016/j.jallcom.2022.164600
|
[12] |
苏磊, 杨国强. 动态压力加载/卸载装置dDAC及原位表征技术研究进展 [J]. 高压物理学报, 2021, 35(6): 060102. doi: 10.11858/gywlxb.20210505
SU L, YANG G Q. Research progress of dynamic pressure loading/unloading device and in-situ characterization technology [J]. Chinese Journal of High Pressure Physics, 2021, 35(6): 060102. doi: 10.11858/gywlxb.20210505
|
[13] |
GOETZ R L, SEETHARAMAN V. Modeling dynamic recrystallization using cellular automata [J]. Scripta Materialia, 1998, 38(3): 405–413. doi: 10.1016/S1359-6462(97)00500-9
|
[14] |
JONAS J J, QUELENNEC X, JIANG L, et al. The Avrami kinetics of dynamic recrystallization [J]. Acta Materialia, 2009, 57(9): 2748–2756. doi: 10.1016/j.actamat.2009.02.033
|
[15] |
KUBIN L P, CANOVA G, CONDAT M, et al. Dislocation microstructures and plastic flow: a 3D simulation [J]. Solid State Phenomena, 1992, 23/24: 455–472. doi: 10.4028/www.scientific.net/SSP.23-24.455
|
[16] |
MA A, ROTERS F. A constitutive model for fcc single crystals based on dislocation densities and its application to uniaxial compression of aluminium single crystals [J]. Acta Materialia, 2004, 52(12): 3603–3612. doi: 10.1016/j.actamat.2004.04.012
|
[17] |
MA A, ROTERS F, RAABE D. A dislocation density based constitutive model for crystal plasticity FEM including geometrically necessary dislocations [J]. Acta Materialia, 2006, 54(8): 2169–2179. doi: 10.1016/j.actamat.2006.01.005
|
[18] |
PÉREZ-PRADO M T, DEL VALLE J A, CONTRERAS J M, et al. Microstructural evolution during large strain hot rolling of an AM60 Mg alloy [J]. Scripta Materialia, 2004, 50(5): 661–665. doi: 10.1016/j.scriptamat.2003.11.014
|
[19] |
SAKAI T, BELYAKOV A, KAIBYSHEV R, et al. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions [J]. Progress in Materials Science, 2014, 60: 130–207. doi: 10.1016/j.pmatsci.2013.09.002
|
[20] |
CHEN L Q, YANG W. Computer simulation of the domain dynamics of a quenched system with a large number of nonconserved order parameters: the grain-growth kinetics [J]. Physical Review B, 1994, 50(21): 15752–15756. doi: 10.1103/PhysRevB.50.15752
|
[21] |
MOELANS N, GODFREY A, ZHANG Y B, et al. Phase-field simulation study of the migration of recrystallization boundaries [J]. Physical Review B, 2013, 88(5): 054103. doi: 10.1103/PhysRevB.88.054103
|
[22] |
ZHAO P Y, SONG EN LOW T, WANG Y Z, et al. An integrated full-field model of concurrent plastic deformation and microstructure evolution: application to 3D simulation of dynamic recrystallization in polycrystalline copper [J]. International Journal of Plasticity, 2016, 80: 38–55. doi: 10.1016/j.ijplas.2015.12.010
|
[23] |
CAI Y, SUN C Y, LI Y L, et al. Phase field modeling of discontinuous dynamic recrystallization in hot deformation of magnesium alloys [J]. International Journal of Plasticity, 2020, 133: 102773. doi: 10.1016/j.ijplas.2020.102773
|
[24] |
姚松林, 裴晓阳, 于继东, 等. 基于位错动力学方法的动态塑性变形研究 [J]. 高压物理学报, 2019, 33(3): 030107. doi: 10.11858/gywlxb.20190727
YAO S L, PEI X Y, YU J D, et al. Overview of the study of dynamical plastic deformation based on dislocation dynamics method [J]. Chinese Journal of High Pressure Physics, 2019, 33(3): 030107. doi: 10.11858/gywlxb.20190727
|
[25] |
许可. 相场模拟多物理场调控镁合金不连续动态再结晶 [D]. 北京: 北京理工大学, 2023.
XU K. Multi-physics-field manipulating discontinuous dynamic recrystallization in magnesium alloys via phase-field simulations [D]. Beijing: Beijing Institute of Technology, 2023.
|
[26] |
CHEN M S, YUAN W Q, LI H B, et al. Modeling and simulation of dynamic recrystallization behaviors of magnesium alloy AZ31B using cellular automaton method [J]. Computational Materials Science, 2017, 136: 163–172. doi: 10.1016/j.commatsci.2017.05.009
|
[27] |
LIU J, CUI Z, RUAN L. A new kinetics model of dynamic recrystallization for magnesium alloy AZ31B [J]. Materials Science and Engineering: A, 2011, 529: 300–310. doi: 10.1016/j.msea.2011.09.032
|
[28] |
LI Y, HOU P J, WU Z G, et al. Dynamic recrystallization of a wrought magnesium alloy: grain size and texture maps and their application for mechanical behavior predictions [J]. Materials & Design, 2021, 202: 109562. doi: 10.1016/j.matdes.2021.109562
|
[29] |
CHEN S F, LI D Y, ZHANG S H, et al. Modelling continuous dynamic recrystallization of aluminum alloys based on the polycrystal plasticity approach [J]. International Journal of Plasticity, 2020, 131: 102710. doi: 10.1016/j.ijplas.2020.102710
|
[30] |
HUANG W Y, CHEN J H, ZHANG R Z, et al. Effect of deformation modes on continuous dynamic recrystallization of extruded AZ31 Mg alloy [J]. Journal of Alloys and Compounds, 2022, 897: 163086. doi: 10.1016/j.jallcom.2021.163086
|
[31] |
LEONARD M, MOUSSA C, ROATTA A, et al. Continuous dynamic recrystallization in a Zn-Cu-Ti sheet subjected to bilinear tensile strain [J]. Materials Science and Engineering: A, 2020, 789: 139689. doi: 10.1016/j.msea.2020.139689
|
[32] |
LIU L, WU Y X, AHMAD A S. A novel simulation of continuous dynamic recrystallization process for 2219 aluminium alloy using cellular automata technique [J]. Materials Science and Engineering: A, 2021, 815: 141256. doi: 10.1016/j.msea.2021.141256
|
[33] |
ZHANG J J, YI Y P, HE H L, et al. Kinetic model for describing continuous and discontinuous dynamic recrystallization behaviors of 2195 aluminum alloy during hot deformation [J]. Materials Characterization, 2021, 181: 111492. doi: 10.1016/j.matchar.2021.111492
|
[34] |
GUO P C, LIU X, ZHU B W, et al. The microstructure evolution and deformation mechanism in a casting AM80 magnesium alloy under ultra-high strain rate loading [J]. Journal of Magnesium and Alloys, 2022, 10(11): 3205–3216. doi: 10.1016/j.jma.2021.07.032
|
[35] |
LI N L, HUANG G J, ZHONG X Y, et al. Deformation mechanisms and dynamic recrystallization of AZ31 Mg alloy with different initial textures during hot tension [J]. Materials & Design, 2013, 50: 382–391. doi: 10.1016/j.matdes.2013.03.028
|
[36] |
POPOVA E, BRAHME A P, STARASELSKI Y, et al. Effect of extension
|
[37] |
XIE C, HE J M, ZHU B W, et al. Transition of dynamic recrystallization mechanisms of as-cast AZ31 Mg alloys during hot compression [J]. International Journal of Plasticity, 2018, 111: 211–233. doi: 10.1016/j.ijplas.2018.07.017
|
[38] |
XU S W, KAMADO S, MATSUMOTO N, et al. Recrystallization mechanism of as-cast AZ91 magnesium alloy during hot compressive deformation [J]. Materials Science and Engineering: A, 2009, 527(1/2): 52–60. doi: 10.1016/j.msea.2009.08.062
|