knowledge of professional and technical personnel Notice on the organization of advanced research class on high-pressure science and new materials of engineering
Volume 35 Issue 5
Sep 2021
Turn off MathJax
Article Contents
Chinese Journal of High Pressure Physics  > 2021  >  35(5): 054203.
BAI Hui, HUI Hu, YANG Bin, KONG Fang. Strain Response and Analysis of Pressure Vessels with Small Delamination Defects[J]. Chinese Journal of High Pressure Physics, 2021, 35(5): 054203. doi: 10.11858/gywlxb.20210717
Citation: BAI Hui, HUI Hu, YANG Bin, KONG Fang. Strain Response and Analysis of Pressure Vessels with Small Delamination Defects[J]. Chinese Journal of High Pressure Physics, 2021, 35(5): 054203. doi: 10.11858/gywlxb.20210717
shu

Strain Response and Analysis of Pressure Vessels with Small Delamination Defects

doi: 10.11858/gywlxb.20210717
  • 1.

    School of Mechanical and Power Engineering, East China University of Science and Technology, Shanghai 200237, China

  • 2.

    School of Aerospace and Mechanics, Tongji University, Shanghai 200092, China

  • 3.

    Zaozhuang Vocational College of Science and Technology, Zaozhuang 277599, Shandong, China

  • Received Date: 27 Jan 2021
  • Rev Recd Date: 14 Feb 2021
    Abstract
  • Using vinyl ester resin prepreg and winding method, a ECR corrosion resistant glass fiber reinforced epoxy resin matrix composite pressure vessel was manufactured. The strain variation of the pressure cylinder was measured in the hydraulic test using the electrical method.And the strain response of the pressure vessel with internal delamination defects under external loadings was predicted by Abaqus/Explicit finite element simulation. The experimental and simulation results show that the error between the results of the finite element model and the experimental results is less than 12%. When the composite pressure vessel containing internal delamination defects (defect diameter 10, 20, 30, 40 and50 mm) is subjected to displacement load, the circumferential strain is the main strain, the maximum longitudinal strain and Mises stress position coincide with the loading position, and the maximum Mises stress increases with the increasing delamination area.

     

    • FullText(HTML)
  • loading
    • References(19)
  • [1]
    HAN M G, CHANG S H. Failure analysis of a Type Ⅲ hydrogen pressure vessel under impact loading induced by free fall [J]. Composite Structures, 2015, 127: 288–297. doi: 10.1016/j.compstruct.2015.03.027
    [2]
    PERILLO G, GRYTTEN F, SØRBØ S, et al. Numerical/experimental impact events on filament wound composite pressure vessel [J]. Composites Part B: Engineering, 2015, 69: 406–417.
    [3]
    杨留鑫. 低速冲击载荷下复合材料缠绕压力容器的损伤分析 [D]. 大连: 大连理工大学, 2012.

    YANG L X. Damage analysis of composite overwrapped pressure vessel under low velocity impact [D]. Dalian: Dalian University of Technology, 2012.
    [4]
    HER S C, LIANG Y C. The finite element analysis of composite laminates and shell structures subjected to low velocity impact [J]. Composite Structures, 2004, 66(1/2/3/4): 277–285.
    [5]
    SHI Y, SWAIT T, SOUTIS C. Modelling damage evolution in composite laminates subjected to low velocity impact [J]. Composite Structures, 2012, 94(9): 2902–2913. doi: 10.1016/j.compstruct.2012.03.039
    [6]
    王晓宏, 张博明, 刘长喜, 等. 纤维缠绕复合材料压力容器渐进损伤分析 [J]. 计算力学学报, 2009, 26(3): 446–452.

    WANG X H, ZHANG B M, LIU C X, et al. Progressive failure analysis of composite overwrapped pressure vessels [J]. Chinese Journal of Computational Mechanics, 2009, 26(3): 446–452.
    [7]
    OKABE Y, TSUJI R, TAKEDA N. Application of chirped fiber Bragg grating sensors for identification of crack locations in composites [J]. Composites Part A: Applied Science and Manufacturing, 2004, 35(1): 59–65.
    [8]
    何录菊, 马李. 复合材料压力容器输进损伤的模拟研究 [J]. 台州学院学报, 2011, 33(6): 36–41. doi: 10.3969/j.issn.1672-3708.2011.06.008

    HE L J, MA L. Study on simulation progressive damage of composite pressure vessel [J]. Journal of Taizhou University, 2011, 33(6): 36–41. doi: 10.3969/j.issn.1672-3708.2011.06.008
    [9]
    饶辉, 许希武, 朱炜垚, 等. 复合材料加筋板低速冲击损伤的数值模拟 [J]. 复合材料学报, 2013, 30(4): 211–218.

    RAO H, XU X W, ZHU W Y, et al. Numerical simulation of low velocity impact damage on stiffened composite panels [J]. Acta Materiae Compositae Sinica, 2013, 30(4): 211–218.
    [10]
    SHIVAKUMAR K N, ELBER W, ILLG W. Prediction of impact force and duration due to low-velocity impact on circular composite laminates [J]. Journal of Applied Mechanics, 1985, 52(3): 674–680. doi: 10.1115/1.3169120
    [11]
    ZU L, XU H, ZHANG B, et al. Design and production of filament-wound composite square tubes [J]. Composite Structures, 2018, 191: 202–208. doi: 10.1016/j.compstruct.2018.02.069
    [12]
    ZU L, WANG J H, LI S X. Influence of fiber slippage coefficient distributions on the geometry and performance of composite pressure vessels [J]. Polymer Composites, 2016, 37: 315–321. doi: 10.1002/pc.23183
    [13]
    ZHANG B, XU H, ZU L, et al. Design of filament-wound composite elbows based on non-geodesic trajectories [J]. Composite Structures, 2018, 189: 635–640. doi: 10.1016/j.compstruct.2018.02.008
    [14]
    HAO J C, LENG J S, WEI Z. Non-destructive evaluation of composite pressure vessel by using FBG sensors [J]. Chinese Journal of Aeronautics, 2007, 20(2): 120–123.
    [15]
    LIU P F, ZHENG J Y. Progressive failure analysis of carbon fiber/epoxy composite laminates using continuum damage mechanics [J]. Materials Science and Engineering: A, 2008, 48(1/2): 5711–5717.
    [16]
    王莉, 刘国强, 肖迎春. 基于代理模型的复合材料加筋壁板分层损伤定量监测方法 [J]. 复合材料学报, 2020, 37(2): 302–308.

    WANG L, LIU G Q, XIAO Y C. Quantitative monitoring method for delamination damage of stiffened composite panel based on surrogate model [J]. Acta Materiae Compositae Sinica, 2020, 37(2): 302–308.
    [17]
    KHECHAI A, TATI A, GUERIRA B, et al. Strength degradation and stress analysis of composite plates with circular, square and rectangular notches using digital image correlation [J]. Composite Structures, 2018, 185: 699–715. doi: 10.1016/j.compstruct.2017.11.060
    [18]
    ALSHAHRANI R F, MERAH N, KHAN A M A, et al. On the impact-induced damage in glass fiber reinforced epoxy pipes [J]. International Journal of Impact Engineering, 2016, 97: 57–65. doi: 10.1016/j.ijimpeng.2016.06.002
    [19]
    YANG B, HE L, GAO Y. Simulation on impact response of FMLs: effect of fiber stacking sequence, thickness, and incident angle [J]. Science and Engineering of Composite Materials, 2018, 25(3): 621–631. doi: 10.1515/secm-2016-0226
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(9)  / Tables(3)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views(3595) PDF downloads(30) Cited by()
    Proportional views
    Related

    Copyright©《高压物理学报》编辑部

    Tel:0816-2490042 E-mail:gaoya@caep.cn

    Shu ICP, 11011126 -2

    Supported by: Beijing Renhe Information Technology Co. Ltd support: info@rhhz.net  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return