knowledge of professional and technical personnel Notice on the organization of advanced research class on high-pressure science and new materials of engineering
Volume 32 Issue 6
Dec 2018
Turn off MathJax
Article Contents
Chinese Journal of High Pressure Physics  > 2018  >  32(6): 065106.
SUN Jianjun, LI Rujiang, YANG Yue, WAN Qinghua, ZHANG Ming, SUN Miao, LI Yang. Numerical Simulation of the Effect of Auxiliary Liner Material on the Performance of Linear Shaped Charge Jet[J]. Chinese Journal of High Pressure Physics, 2018, 32(6): 065106. doi: 10.11858/gywlxb.20180542
Citation: SUN Jianjun, LI Rujiang, YANG Yue, WAN Qinghua, ZHANG Ming, SUN Miao, LI Yang. Numerical Simulation of the Effect of Auxiliary Liner Material on the Performance of Linear Shaped Charge Jet[J]. Chinese Journal of High Pressure Physics, 2018, 32(6): 065106. doi: 10.11858/gywlxb.20180542
shu

Numerical Simulation of the Effect of Auxiliary Liner Material on the Performance of Linear Shaped Charge Jet

doi: 10.11858/gywlxb.20180542

  • School of Environment and Saftey Engineering, North University of China, Taiyuan 030051, China

  • Received Date: 23 Apr 2018
  • Rev Recd Date: 05 Jun 2018
    Abstract
  • To improve the performance of linear shaped charge jet, this study applies the truncated and auxiliary liner structure to the linear shaped charge.The three-dimensional finite element analysis software (LS-DYNA) was used to simulate the linear shaped charge jet formed with copper as the main liner and Al, Cu and W as auxiliary liner.At the same time, comparison between the formed linear shaped charge jet and the traditional jet is performed, indicating that the jet formed by the truncated and auxiliary liner structure has better performance.With the increase of the density and hardness of the auxiliary liner material, the jet's ductility, speed and effective mass are improved and all of them are superior to the traditional wedge cover structure.Compared with the conventional wedge cover structure, the speed and the effective length of the jet utilizing W as the auxiliary material increase about 25.9% and 145%, respectively.

     

    • FullText(HTML)
  • loading
    • References(8)
  • [1]
    崔云航, 李裕春, 吴腾芳, 等.线型聚能装药数值模拟与优化设计[J].爆破, 2005, 22(3):26-29 doi: 10.3963/j.issn.1001-487X.2005.03.007

    CUI Y H, LI Y C, WU T F, et al.Numerical simulation and optimization design of line shaped charge charge[J]. Blasting, 2005, 22(3):26-29. doi: 10.3963/j.issn.1001-487X.2005.03.007
    [2]
    王克波, 郑宇.线性聚能装药结构的数值仿真优化[J].爆破, 2012, 29(2):99-103. doi: 10.3963/j.issn.1001-487X.2012.02.026

    WANG K B, ZHENG Y.Numercial simulation and optimization of the liner shaped charging struction[J]. Blasting, 2012, 29(2):99-103. doi: 10.3963/j.issn.1001-487X.2012.02.026
    [3]
    武双章, 顾文彬, 李旭锋.椭圆形罩线型聚能装药结构参数正交优化研究[J].工程爆破, 2013, 19(3):1-5. doi: 10.3969/j.issn.1006-7051.2013.03.001

    WU S Z, GU W B, LI X F.Study on the orthogonal optimization design of structrue parameters of the liner shaped charge with ovalcover[J]. Engineering Blasting, 2013, 19(3):1-5. doi: 10.3969/j.issn.1006-7051.2013.03.001
    [4]
    徐景林, 顾文彬, 武双章, 等.带隔板线性聚能装药侵彻能力的正交优化[J].工程爆破, 2016, 22(1):77-81. doi: 10.3969/j.issn.1006-7051.2016.01.017

    XU J L, GU W B, WU S Z, et al.Orthogonal optimization of penetration ability of linear shaped charge with wave-shaper[J]. Enginering Blasting, 2016, 22(1):77-81. doi: 10.3969/j.issn.1006-7051.2016.01.017
    [5]
    MININ I V, MININ O V.Physics of hypercumulation:jet formation in shaped charge and ablatively-driven implosion of hollow cones[J]. International Letters of Chemistry, Physics and Astronomy, 2014, 22(3):76-86.
    [6]
    关荣, 张树海, 苟瑞君, 等.一种截顶线性聚能装药射流特性的数值模拟[J].火炸药学报, 2017, 40(3):2-5. http://d.old.wanfangdata.com.cn/Periodical/hzyxb201703017

    GUAN R, ZHANG S H, GOU R J, et al.Numercial simulation on the jet characteristics of a truncated liner shaped charge[J]. Chinese Journal of Explosives & Propellants, 2017, 40(3):2-5. http://d.old.wanfangdata.com.cn/Periodical/hzyxb201703017
    [7]
    刘宏伟, 夏松林, 赵靖.V形反应装甲与射流作用过程分析[J].兵器材料科学与工程, 2011, 32(4):20-22. http://d.old.wanfangdata.com.cn/Periodical/bqclkxygc201104006

    LIU H W, XIA S L, ZHAO J.Interaction process between jet and V-shaped double ERA[J]. Ordnance Material Science and Engineering, 2011, 32(4):20-22. http://d.old.wanfangdata.com.cn/Periodical/bqclkxygc201104006
    [8]
    武海军, 陈利, 王江波, 等.反应装甲对射流干扰的数值模拟研究[J].北京理工大学学报, 2006, 26(7):565-568. doi: 10.3969/j.issn.1001-0645.2006.07.001

    WU H J, CHEN L, WANG J B, et al.Numerical simulation on reactive armor disturbing jet[J]. Transactions of Beijing Institute of Technology, 2006, 26(7):565-568. doi: 10.3969/j.issn.1001-0645.2006.07.001
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(8)  / Tables(3)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views(7255) PDF downloads(18) Cited by()
    Proportional views
    Related

    Copyright©《高压物理学报》编辑部

    Tel:0816-2490042 E-mail:gaoya@caep.cn

    Shu ICP, 11011126 -2

    Supported by: Beijing Renhe Information Technology Co. Ltd support: info@rhhz.net  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return