Comparison of Mechanical Properties and Damage Mode of Tungsten Alloy Spheres in Two Different States

KONG Qingqiang; ZHOU Tao; SHEN Fei

doi:10.11858/gywlxb.20170682

Volume 32 Issue 3

Apr 2018

Turn off MathJax

Article Contents

Abstract

References

Chinese Journal of High Pressure Physics > 2018 > 32(3): 034201.

KONG Qingqiang, ZHOU Tao, SHEN Fei. Comparison of Mechanical Properties and Damage Mode of Tungsten Alloy Spheres in Two Different States[J]. Chinese Journal of High Pressure Physics, 2018, 32(3): 034201. doi: 10.11858/gywlxb.20170682

Citation:

KONG Qingqiang, ZHOU Tao, SHEN Fei. Comparison of Mechanical Properties and Damage Mode of Tungsten Alloy Spheres in Two Different States[J]. Chinese Journal of High Pressure Physics, 2018, 32(3): 034201. doi: 10.11858/gywlxb.20170682

Citation:

PDF( 5247 KB)

Comparison of Mechanical Properties and Damage Mode of Tungsten Alloy Spheres in Two Different States

doi: 10.11858/gywlxb.20170682

Xi'an Institute of Modern Chemistry, Xi'an 710065, China

Received Date: 22 Nov 2017
Rev Recd Date: 21 Dec 2017

Abstract

Abstract

In this paper, we studied the mechanical properties of tungsten alloy spheres in sintered and polished states using the quasi static test and the dynamic loading test, observed their metallographic structure and damage mode before and after the test using SEM, and analyzed the causes leading to their difference.The result showed that the surface microstructure of the tungsten alloy sphere in the sintered state was more uniform than that in the polished state, which accounts for its better mechanical properties.
- tungsten alloy sphere,
- mechanical properties,
- damage mode,
- SEM

FullText(HTML)

References(13)

References

[1]	王松, 陈宏燕, 胡洁琼.高比重钨合金的现状研究[J].贵金属, 2011, 32(3):85-88. http://www.cnki.com.cn/Article/CJFDTOTAL-GJSZ201103017.htm WANG S, CHEN H Y, HU J Q.Research status of tungsten alloys[J].Precious Metals, 2011, 32(3):85-88. http://www.cnki.com.cn/Article/CJFDTOTAL-GJSZ201103017.htm
[2]	吴泽卫, 徐英鸽, 李明.高密度钨合金的研究现状[J].热加工工艺, 2014, 43(12):5-7. http://www.cnki.com.cn/Article/CJFDTOTAL-SJGY201412003.htm WU Z W, XU Y G, LI M, Research status of high-density tungsten alloy[J].HOT Working Technology, 2014, 43(12):5-7. http://www.cnki.com.cn/Article/CJFDTOTAL-SJGY201412003.htm
[3]	谭多望, 王广军, 龚晏青.球形钨合金破片空气阻力系数实验研究[J].高压物理学报, 2007, 21(3):235-236. http://www.gywlxb.cn/CN/abstract/abstract191.shtml TAN D W, WANG G J, GONG Y Q.Experimental atudies on air drag coefficient of spherical tungsten fragmnets[J].Chinese Journal of High Pressure Physics, ,2007, 21(3):235-236. http://www.gywlxb.cn/CN/abstract/abstract191.shtml
[4]	中国人民解放军总装备部. 军用钨合金珠: GJB3793-1999[S]. 北京: 中国标准出版社, 2000. The General Reserve Department of PLA.Military tungsten alloy pearl:GJB3793-1999[S].Beijing:Chinese Standards Press, 2000.
[5]	谭多望, 李翔, 温殿英.球形钨合金破片终点弹道性能实验研究[J].爆炸与冲击, 2003, 23(5):425-429. http://cpfd.cnki.com.cn/Article/CPFDTOTAL-GCWL200200001016.htm TAN D W, LI X, WEN D Y.Experimental investigation of terminal effects of spherical tungsten fragments[J].Explosion and Shock Waves, 2003, 23(5):425-429. http://cpfd.cnki.com.cn/Article/CPFDTOTAL-GCWL200200001016.htm
[6]	姜春兰, 陈放, 李明.钨球对陶瓷/铝复合靶的侵彻与贯穿[J].兵工学报, 2001, 22(1):36-40. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=bgxb200101010 JIANG C L, CHEN F, LI M.Penetration and perforation of ceramic/aluminum composite targets by high-speed tungsten alloy sphere[J].Acta Armamentarii, 2001, 22(1):36-40. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=bgxb200101010
[7]	张兆森, 熊湘军, 王伏生.钨合金珠性能测试方法的探讨[J].矿冶工程, 2002, 22(1):96-98. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=kygc200201031 ZHANG Z S, XIONG X J, WANG F S.Investigation of testing methods of tungsten alloy ball's properties[J].Mining and Metallurgical Engineering, 2002, 22(1):96-98. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=kygc200201031
[8]	米双山, 张锡恩, 陶贵明.钨球侵彻LY-12铝合金靶板的有限元分析[J].爆炸与冲击, 2005, 25(5):477-480. doi: 10.11883/1001-1455(2005)05-0477-04 MI S S, ZHANG X E, TAO G M.Finite element analysis of spherical fragments penetrating LY-12 aluminum alloy target[J].Explosion and Shock Waves, 2005, 25(5):477-480. doi: 10.11883/1001-1455(2005)05-0477-04
[9]	FORTUNA E, ZIELINSKI W, SIKORSKI K.TEM characterization of microstructure of a tungsten heavy alloy[J].Materials Chemistry and Physics, 2003, 81:469-471. doi: 10.1016/S0254-0584(03)00055-5
[10]	陈强, 尤清照, 葛启录, 等.W-Ni-Fe高比重合金表面强化[J].钢铁研究学报, 2000, 12(2):33-35. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=gtyjxb200002008 CHEN Q, YOU Q Z, GE Q L, et al.Surface harding of W-Ni-Fe heavy alloys[J].Journal of Iron and Steel Research, 2000, 12(2):33-35. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=gtyjxb200002008
[11]	刘桂荣, 刘国辉, 王铁军, 等.W-Ni-Fe高比重合金断口形貌研究[J].中国钨业, 2004, 19(3):36-38. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=zgwy200403012 LIU G R, LIU G H, WANG T J, et al.Research on fracture surface of W-Ni-Fe tungsten heavy alloy[J].China Tungsten Industry, 2004, 19(3):36-38. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=zgwy200403012
[12]	黄继华, 赖和怡, 周国安.高比重钨合金的微观结构和性能的关系[J].粉末冶金技术, 1992, 1(2):63-68. http://kns.cnki.net/KCMS/detail/detail.aspx?filename=fmyj199201014&dbname=CJFD&dbcode=CJFQ HUANG J H, LAI H Y, ZHOU G A.Relation between microstructures and properties of heavy alloys[J].Powder Metallurgy Technology, 1992, 1(2):63-68. http://kns.cnki.net/KCMS/detail/detail.aspx?filename=fmyj199201014&dbname=CJFD&dbcode=CJFQ
[13]	LEE K H, CHA S I, RYU H J, et al.Effect of two-stagesintering process on microstructure and mechanical properties of ODS tungsten heavy alloys[J].Materials Science and Engineering A, 2007, 458(1/2):323-329. https://www.sciencedirect.com/science/article/pii/S0921509307001931

Relative Articles

[1]	SHI Liutong, HUANG Youqi, GAO Yubo, JIA Zhe, LI Zhihao. JH2 Constitutive Model of Inorganic Bulletproof Glass with Damage[J]. Chinese Journal of High Pressure Physics, 2024, 38(4): 044105. doi: 10.11858/gywlxb.20240704
[2]	LI Xuejiao, SUN Biao, ZHANG Wenzhe, LIU Xiao, QIAN Jingye, HAN Ying. Micro-Morphology and Mechanical Properties of Mg/Al Composites under Vacuum Explosion Welding[J]. Chinese Journal of High Pressure Physics, 2024, 38(6): 064105. doi: 10.11858/gywlxb.20240793
[3]	WANG Erbo, WANG Zhifeng, WANG Yaqiong. Mechanical Properties and Energy Evolution Characteristics of Fracture-Bearing Rocks under Uniaxial Compression[J]. Chinese Journal of High Pressure Physics, 2024, 38(1): 014201. doi: 10.11858/gywlxb.20230746
[4]	ZHAO Chunfeng, ZHANG Li, LI Xiaojie. Damage Failure and Anti-Blast Performance of Concrete-Infilled Double Steel Corrugated-Plate Wall under Near Field Explosion[J]. Chinese Journal of High Pressure Physics, 2024, 38(1): 014102. doi: 10.11858/gywlxb.20230727
[5]	CHANG Lijun, HUANG Xingyuan, YUAN Shenglin, CAI Zhihua. Mechanical Properties and Failure Analysis of UHMWPE Fiber Composite Laminates under Compressive Loading[J]. Chinese Journal of High Pressure Physics, 2023, 37(1): 014102. doi: 10.11858/gywlxb.20220633
[6]	BAI Hui, HUI Hu, YANG Yuqing. Effect of Hygrothermal Aging on Mechanical Properties of Glass Fiber/Epoxy VER Composites[J]. Chinese Journal of High Pressure Physics, 2023, 37(1): 014103. doi: 10.11858/gywlxb.20220641
[7]	YANG Zhengqing, LUAN Yunbo, ZHANG Juqi, WEN Zhen, WANG Wei, LI Mingzhen, LI Yongcun. Design and Mechanical Properties of Short Carbon Fiber Reinforced Biomimetic Materials[J]. Chinese Journal of High Pressure Physics, 2023, 37(4): 044102. doi: 10.11858/gywlxb.20230639
[8]	WEN Zhen, ZHANG Guoliang, JIANG Qi, LI Yongcun, GUO Zhangxin, LUAN Yunbo. Mechanical Property and De-Icing Function of Carbon Fibre-Hand-Torn Steel Composites[J]. Chinese Journal of High Pressure Physics, 2023, 37(5): 054101. doi: 10.11858/gywlxb.20230661
[9]	XIONG Heng, MA Yuhong, SI Bowen, XIAO Gesheng, SHU Xuefeng. Mechanical Properties of Electronic Interconnected Conductive Adhesive and Drop Impact Behavior of Adhesive Bonding Point[J]. Chinese Journal of High Pressure Physics, 2022, 36(3): 034103. doi: 10.11858/gywlxb.20210902
[10]	HE Huijuan, YAN Xiaojie, SHU Xuefeng, XIAO Gesheng, HAO Xin, LI Zhigang. Mechanical Properties and Oxidation Behavior of ZrB₂-SiC Ultra-High Temperature Ceramics Prepared by Spark Plasma Sintering[J]. Chinese Journal of High Pressure Physics, 2021, 35(2): 024104. doi: 10.11858/gywlxb.20200623
[11]	KONG Qingqiang, SHEN Fei, XING Yifan, LÜ Yongzhu, CAO Yuwu. Comparative Experimental Study on Dynamic Mechanical Properties of G50 Steel and G31 Steel[J]. Chinese Journal of High Pressure Physics, 2021, 35(1): 014103. doi: 10.11858/gywlxb.20200569
[12]	WU Mingyu, YAN Xiaopeng, GUO Zhangxin, CUI Junjie. Tensile Properties of Low Concentration Graphene Oxide Modified Epoxy Resin-Based Carbon Fiber Laminate[J]. Chinese Journal of High Pressure Physics, 2020, 34(6): 061301. doi: 10.11858/gywlxb.20200541
[13]	ZHANG Feipeng, SHI Jiali, ZHANG Jingwen, BAO Lihong, QIN Guoqiang, ZHANG Guanglei, YANG Xinyu, ZHANG Jiuxing. Elastic and Mechanical Properties of Rare Earth Boride LaB₆ Crystalline Material[J]. Chinese Journal of High Pressure Physics, 2019, 33(2): 022201. doi: 10.11858/gywlxb.20180668
[14]	SONG Lubin, GUO Zhangxin, LI Zhonggui, LUAN Yunbo, ZHAO Dan, ZHANG Qi. Effect of Defective Graphene on Mechanical Properties of Reinforced Resin Matrix Composites[J]. Chinese Journal of High Pressure Physics, 2018, 32(6): 064101. doi: 10.11858/gywlxb.20180586
[15]	ZHENG Jin-Yang, CUI Tian-Cheng, GU Chao-Hua, ZHANG Xin, FU Hai-Long. Effects of High Pressure Hydrogen on Mechanical Properties of 6061 Aluminum Alloy[J]. Chinese Journal of High Pressure Physics, 2017, 31(5): 505-510. doi: 10.11858/gywlxb.2017.05.001
[16]	MIAO Hong, ZUO Dun-Wen, ZHANG Rui-Hong. Microstructure and Mechanical Properties of Internal Thread during Cold Extrusion for Q460 High Strength Steel[J]. Chinese Journal of High Pressure Physics, 2013, 27(3): 337-342. doi: 10.11858/gywlxb.2013.03.004
[17]	WANG Hai-Yan, LIU Lin, CHEN Yan, ZHAO Jun, LIU Jian-Hua, ZHANG Rui-Jun. Effects of High Pressure Treatment on Micro-Mechanical Properties of 7075 Aluminum Alloy[J]. Chinese Journal of High Pressure Physics, 2013, 27(5): 768-772. doi: 10.11858/gywlxb.2013.05.018
[18]	WANG Li-Wen, PANG Bao-Jun, CHEN Yong, ZHANG Kai. Study on Dynamic Mechanical Behavior and Constitutive Model of Reactive Powder Concrete after Exposure in High Temperature[J]. Chinese Journal of High Pressure Physics, 2012, 26(4): 361-368. doi: 10.11858/gywlxb.2012.04.001
[19]	LI Hai-Tao, ZHU Shi-Jian, DIAO Ai-Min, HE Qi-Wei. Characteristics of Flow-Field and Sagging Damage of Free-Free Beam Subjected to Underwater Explosion Bubbles[J]. Chinese Journal of High Pressure Physics, 2012, 26(5): 494-500. doi: 10.11858/gywlxb.2012.05.003
[20]	ZHONG Wei-Zhou, SONG Shun-Cheng, XIE Ruo-Ze, HUANG Xi-Cheng. Experimental Research on Compression Mechanical Properties of Ta-10W[J]. Chinese Journal of High Pressure Physics, 2010, 24(1): 49-54 . doi: 10.11858/gywlxb.2010.01.009

Supplements(0)

Cited By

Proportional views

Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Figures(8) / Tables(4)

Get Citation

PDF

XML

Article Metrics

Article views(7380) PDF downloads(216)

Comparison of Mechanical Properties and Damage Mode of Tungsten Alloy Spheres in Two Different States

doi: 10.11858/gywlxb.20170682

Abstract

References

Relative Articles

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Proportional views

Related

Comparison of Mechanical Properties and Damage Mode of Tungsten Alloy Spheres in Two Different States

doi: 10.11858/gywlxb.20170682

Abstract

References

Relative Articles

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Proportional views

Related

Export File

Citation

Format

Content