Development of Domestic Hinge-Type Cubic Presses Based on High Pressure Scientific Research

PENG Fang; HE Duanwei

doi:10.11858/gywlxb.20170600

Volume 32 Issue 1

Dec 2017

Turn off MathJax

Article Contents

Abstract

References

Chinese Journal of High Pressure Physics > 2018 > 32(1): 010105.

PENG Fang, HE Duanwei. Development of Domestic Hinge-Type Cubic Presses Based on High Pressure Scientific Research[J]. Chinese Journal of High Pressure Physics, 2018, 32(1): 010105. doi: 10.11858/gywlxb.20170600

Citation:

PENG Fang, HE Duanwei. Development of Domestic Hinge-Type Cubic Presses Based on High Pressure Scientific Research[J]. Chinese Journal of High Pressure Physics, 2018, 32(1): 010105. doi: 10.11858/gywlxb.20170600

Citation:

PDF( 2160 KB)

Development of Domestic Hinge-Type Cubic Presses Based on High Pressure Scientific Research

doi: 10.11858/gywlxb.20170600

PENG Fang,
HE Duanwei^{*
,
,}

Institute of Atomic and Molecular Physics, Sichuan University, Chengdu 610065, China

Received Date: 26 Jun 2017
Rev Recd Date: 26 Sep 2017

Abstract

Abstract

The China-made hinge-type large volume cubic press is a high-pressure device independently developed in China.After 50 years of continuous development, it has achieved fruitful results in industrial synthesis and high-pressure scientific research and occupied a special place in the world.In this paper, we take the topic of China-made hinge-type large volume cubic press used in high-pressure scientific research at the High Pressure Science and Technology Laboratory of Sichuan University, and demonstrate its development and technical characteristics.The technical performance of the device will be continuously improved in the development process in the future, so that it will play a greater role in China's industrial high-pressure synthesis and high-pressure scientific research.
- cubic press,
- high pressure science and technology,
- large volume press,
- superhard material

FullText(HTML)

References(18)

References

[1]	LIEBERMANN R C.Multi-anvil, high pressure apparatus:a half-century of development and progress[J]. High Pressure Research, 2011, 31(4):493-532. doi: 10.1080/08957959.2011.618698
[2]	KUNIMOTO T, IRIFUNE T. Pressure generation to 125 GPa using a 6-8-2 type multianvil apparatus with nano-polycrystalline diamond anvils[C]//Journal of Physics: Conference Series. IOP Publishing, 2010, 215(1): 012190.
[3]	KUNIMOTO T, IRIFUNE T, SUMIYA H.Pressure generation in a 6-8-2 type multi-anvil system:a performance test for third-stage anvils with various diamonds[J]. High Pressure Research, 2008, 28(3):237-244. doi: 10.1080/08957950802246530
[4]	SUMIYA H, IRIFUNE T.Indentation hardness of nano-polycrystalline diamond prepared from graphite by direct conversion[J]. Diamond and Related Materials, 2004, 13(10):1771-1776. doi: 10.1016/j.diamond.2004.03.002
[5]	SUMIYA H, HARANO K, IRIFUNE T.Ultrahard diamond indenter prepared from nanopolycrystalline diamond[J]. Review of Scientific Instruments, 2008, 79(5):056102. doi: 10.1063/1.2918985
[6]	SUMIYA H, IRIFUNE T.Hardness and deformation microstructures of nano-polycrystalline diamonds synthesized from various carbons under high pressure and high temperature[J]. Journal of Materials Research, 2007, 22(8):2345-2351. doi: 10.1557/jmr.2007.0295
[7]	LE GUILLOU C, BRUNET F, IRIFUNE T, et al.Nanodiamond nucleation below 2 273 K at 15 GPa from carbons with different structural organizations[J]. Carbon, 2007, 45(3):636-648. doi: 10.1016/j.carbon.2006.10.005
[8]	IRIFUNE T, KURIO A, SAKAMOTO S, et al.Formation of pure polycrystalline diamond by direct conversion of graphite at high pressure and high temperature[J]. Physics of the Earth and Planetary Interiors, 2004, 143:593-600. https://www.sciencedirect.com/science/article/pii/S0031920104000780
[9]	DUBROVINSKY L, DUBROVINSKAIA N, BYKOVA E, et al.The most incompressible metal osmium at static pressures above 750 gigapascals[J]. Nature, 2015, 525(7568):226-229. doi: 10.1038/nature14681
[10]	王福龙, 贺端威, 房雷鸣, 等.基于铰链式六面顶压机的二级6-8型大腔体静高压装置[J].物理学报, 2008, 57(9):5429-5434. doi: 10.7498/aps.57.5429 WANG F L, HE D W, FANG L M, et al.Design and assembly of split-sphere high pressure apparatus based on the hinge-type cubic-anvil press[J]. Acta Physica Sinica, 2008, 57(9):5429-5434. doi: 10.7498/aps.57.5429
[11]	方啸虎.中国超硬材料与制品50周年精选论文集[M].杭州:浙江大学出版社, 2014:23-31.
[12]	王海阔. 基于国产六面顶压机增压装置的压力产生极限扩展与应用[D]. 成都: 四川大学, 2013. WANG H K. Devlopment and application of pressure generation techniques based on hinge-type cubic press[D]. Chengdu: Sichuan University, 2013.
[13]	WALKER D, CARPENTER M A, HITCH C M.Some simplifications to multianvil devices for high pressure experiments[J]. The American Mineralogist, 1990, 75(9/10):1020-1028. https://pubs.geoscienceworld.org/msa/ammin/article-abstract/75/9-10/1020/42423/some-simplifications-to-multianvil-devices-for
[14]	OHTANI E, OKADA Y, KAGAWA N, et al. Development of a new guide-block system and high pressure and temperature generation[C]//Abstract of the 28th High Pressure Conference of Japan. Kobe, 1987: 222-223.
[15]	XU C, HE D W, WANG H K, et al.Nano-polycrystalline diamond formation under ultra-high pressure[J]. International Journal of Refractory Metals and Hard Materials, 2013, 36:232-237. doi: 10.1016/j.ijrmhm.2012.09.004
[16]	王海阔, 贺端威, 许超, 等.复合型多晶金刚石末级压砧的制备并标定六面顶压机6-8型压腔压力至35 GPa[J].物理学报, 2013, 62(18):180703. doi: 10.7498/aps.62.180703 WANG H K, HE D W, XU C, et al.Calibration of pressure to 35 GPa for the cubic press using the diamond-cemented carbide compound anvil[J]. Acta Physica Sinica, 2013, 62(18):180703. doi: 10.7498/aps.62.180703
[17]	LIU G D, KOU Z L, YAN X Z, et al.Submicron cubic boron nitride as hard as diamond[J]. Applied Physics Letters, 2015, 106(12):121901. doi: 10.1063/1.4915253
[18]	WANG P, HE D W, WANG L P, et al.Diamond-cBN alloy:a universal cutting material[J]. Applied Physics Letters, 2015, 107(10):101901. doi: 10.1063/1.4929728

Relative Articles

[1]	ZHAO Liang, LI Mingzhe, WU Nannan, WANG Jinlong, LIANG Xiaobo, GU Zhouzhi, LI Huaiyong. Calculation and Numerical Simulation of Winding Discreted Large Cavity of Ultra-High Pressure Die[J]. Chinese Journal of High Pressure Physics, 2025, 39(3): 033301. doi: 10.11858/gywlxb.20240851
[2]	HUANG Hongdong, YU Xiaohui, HE Duanwei. High Pressure Sintering of B-C-N-Ti Quaternary Superhard Composites[J]. Chinese Journal of High Pressure Physics, 2024, 38(4): 041102. doi: 10.11858/gywlxb.20240769
[3]	GE Yufei, YOU Cun, WANG Xinglin, LIAN Min, ZHAO Xinyu, FENG Bingtao, MA Xiaoci, TAO Qiang, HU Kuo, LIU Zhaodong, ZHOU Qiang, ZHU Pinwen. Pressure Calibration Method of 28 GPa for Large-Volume Press[J]. Chinese Journal of High Pressure Physics, 2024, 38(3): 030201. doi: 10.11858/gywlxb.20230807
[4]	ZHANG Jiawei, LI Qiang, WANG Junpu, HE Duanwei. Effect of Re-Compression on the Pressure-Generation Efficiency and Pressure-Seal Capability of Large Volume Cubic Press[J]. Chinese Journal of High Pressure Physics, 2019, 33(2): 020105. doi: 10.11858/gywlxb.20190703
[5]	LIU Xiu-Ru, WANG Jun-Long, CHEN Li-Ying, HONG Shi-Ming. Applications of Rapid Compression Technique within Milliseconds in Materials Science[J]. Chinese Journal of High Pressure Physics, 2017, 31(3): 223-230. doi: 10.11858/gywlxb.2017.03.003
[6]	HOU Qi-Yue, JING Qiu-Min, ZHANG Yi, LIU Sheng-Gang, BI Yan, LIU Lei. Applications of Synchrotron X-Ray Imaging Techniquesin High Static Pressure Researches[J]. Chinese Journal of High Pressure Physics, 2016, 30(6): 537-547. doi: 10.11858/gywlxb.2016.06.016
[7]	HE Fei, HE Duan-Wei, MA Ying-Gong, YAN Xiao-Zhi, LIU Fang-Ming, WANG Yong-Kun, LIU Jin, KOU Zi-Li, PENG Fang. Design Principles and Experimental Study of Centimeter-Scale Sample Chamber for Two-Stage 6-8 Type Static High Pressure Apparatus[J]. Chinese Journal of High Pressure Physics, 2015, 29(3): 161-168. doi: 10.11858/gywlxb.2015.03.001
[8]	ZHANG Yu, HE Duan-Wei, WANG Yong-Kun, LIU Yin-Juan, HU Yi, WANG Jiang-Hua. Reactive Sintering of B₆O/TiB₂ Composites at High Temperature and High Pressure[J]. Chinese Journal of High Pressure Physics, 2015, 29(3): 178-184. doi: 10.11858/gywlxb.2015.03.003
[9]	HAN Qi-Gang, BAN Qing-Chu, YI Zheng, CHEN Meng-Lu, ZHONG Ji-Lun, YANG Wen-Ke, ZHANG Qiang. Study on New Structure of Ultra-High Pressure WC Anvil[J]. Chinese Journal of High Pressure Physics, 2014, 28(6): 686-690. doi: 10.11858/gywlxb.2014.06.007
[10]	HE Qiang, TANG Jun-Jie, WANG Fei, LIU Xi. High Temperature Stable Assembly Designed for Cubic Press[J]. Chinese Journal of High Pressure Physics, 2014, 28(2): 145-151. doi: 10.11858/gywlxb.2014.02.003
[11]	LI Xiang, LIU Qing-Qing, FENG Shao-Min, ZHU Jin-Long, CHEN Liang-Chen, JIN Chang-Qing. The Six over Eight Type Double Stage Large Volume High Pressure and High Temperature Facilities and Their Applications to New Materials Syntheses[J]. Chinese Journal of High Pressure Physics, 2013, 27(2): 223-229. doi: 10.11858/gywlxb.2013.02.009
[12]	WANG Hai-Kuo, HE Duan-Wei, XU Chao, GUAN Jun-Wei, WANG Wen-Dan, KOU Zi-Li, PENG Fang. Development of Large Volume-High Static Pressure Techniques Based on the Hinge-Type Cubic Presses[J]. Chinese Journal of High Pressure Physics, 2013, 27(5): 633-661. doi: 10.11858/gywlxb.2013.05.001
[13]	LIU Fang, LIU Yong-Gang, XIE Hong-Sen. Numerical Simulation of Temperature Field in Sample Assembly of Cubic Press[J]. Chinese Journal of High Pressure Physics, 2012, 26(2): 135-140. doi: 10.11858/gywlxb.2012.02.003
[14]	ZHANG Cong, MA Hong-An, HAN Qi-Gang, LI Zhan-Chang, JIA Xiao-Peng. Stress Analysis on Hinge Sleeve and Cylinder of China-Type Cubic-Anvil High Pressure Apparatus under High Pressure[J]. Chinese Journal of High Pressure Physics, 2010, 24(5): 321-325 . doi: 10.11858/gywlxb.2010.05.001
[15]	CHEN Xiao-Fang, HE Duan-Wei, WANG Fu-Long, ZHANG Jian, LI Yong-Jun, FANG Lei-Ming, LEI Li, KOU Zi-Li. Design and Temperature Calibration for Heater Cell of Split-Sphere High Pressure Apparatus Based on the Hinge-Type Cubic-Anvil Press[J]. Chinese Journal of High Pressure Physics, 2009, 23(2): 98-104 . doi: 10.11858/gywlxb.2009.02.004
[16]	LU Zhong, ZHAN Xiao-Hong, CAO Da-Hu, ZHANG Liang-Ying, YAO Xi. A High Frequency Hydrostatic Pressure Dielectricity Measuring System Based on Cubic Anvil Apparatus[J]. Chinese Journal of High Pressure Physics, 2008, 22(1): 99-102 . doi: 10.11858/gywlxb.2008.01.021
[17]	SHAN Shuang-Ming, WANG Ri-Ping, GUO Jie, LI He-Ping. Pressure Calibration for the Sample Cell of YJ-3000t Multi-Anvil Press at High-Temperature and High-Pressure[J]. Chinese Journal of High Pressure Physics, 2007, 21(4): 367-372 . doi: 10.11858/gywlxb.2007.04.006
[18]	WANG Qing-Song, WANG Zhi-Gang, BI Yan. Design of the Sample Assembly for Ultrasonic Measurement at High Pressure and 300 K in Six-Side Anvil Cell[J]. Chinese Journal of High Pressure Physics, 2006, 20(3): 331-336 . doi: 10.11858/gywlxb.2006.03.019
[19]	LIU Wei, DU Jian-Guo, YU Yong, BAI Li-Ping, WANG Chuan-Yuan. Correction of Temperature Gradient in Sample Cell of Pulse Transmission Experimental Setup on Multi-Anvil High Pressure Apparatus[J]. Chinese Journal of High Pressure Physics, 2003, 17(2): 95-100 . doi: 10.11858/gywlxb.2003.02.003
[20]	SUN Yue, BI Yan, DONG Yue, LUO Xiang-Jie, DING Li-Ye, YANG Xiang-Dong. Configurational Design for Centralized Control System of Hexa-Orientation Press[J]. Chinese Journal of High Pressure Physics, 2003, 17(3): 235-240 . doi: 10.11858/gywlxb.2003.03.014