knowledge of professional and technical personnel Notice on the organization of advanced research class on high-pressure science and new materials of engineering
Volume 25 Issue 4
Apr 2015
Turn off MathJax
Article Contents
Chinese Journal of High Pressure Physics  > 2011  >  25(4): 310-316 .
LI Xin-E, ZU Jing, XU Peng. A Novel Strain Type High Chamber Pressure Test System[J]. Chinese Journal of High Pressure Physics, 2011, 25(4): 310-316 . doi: 10.11858/gywlxb.2011.04.004
Citation: LI Xin-E, ZU Jing, XU Peng. A Novel Strain Type High Chamber Pressure Test System[J]. Chinese Journal of High Pressure Physics, 2011, 25(4): 310-316 . doi: 10.11858/gywlxb.2011.04.004
shu

A Novel Strain Type High Chamber Pressure Test System

doi: 10.11858/gywlxb.2011.04.004
  • 1.

    Key Laboratory of Instrumentation Science & Dynamic Measurement, Ministry of Education, Taiyuan 030051, China;

  • 2.

    School of Information and Communication Engineering, North University of China, Taiyuan 030051, China

More Information
  • Corresponding author: LI Xin-E
  • Received Date: 07 Jul 2010
  • Rev Recd Date: 06 Dec 2010
  • Issue Publish Date: 15 Aug 2011
    Abstract
  • According to the characteristics of electronic piezo gauge, a novel strain type high chamber pressure test system is developed, which takes the end cover of the electronic piezo gauge as an elastic sensitive component. The mechanical characteristics of electronic piezo gauge shell are analyzed using the deformation theory of thick plates. The stress/strain distribution and model of the elastic sensitive components are simulated by ANSYS software, and the 50-550 MPa static and dynamic calibration experiments are also conducted for comparison. The experimental results show that the linear error, basic error, sensitivity, and measurement range of the system are 0.62%, 4.6%, 2.231 310-12 Pa-1, and 0-600 MPa, respectively. Therefore, the strain type high chamber pressure test system is feasible and accurate.

     

    • FullText(HTML)
  • loading
    • References(22)
  • Zhang Y L, Liu G L. A Computer Test System of Gun Peak Chamber Pressure [J]. Journal of Ballistics, 1998, 10(2): 78-98. (in Chinese)
    张艳玲, 柳光辽. 火炮膛压峰值的计算机测试系统 [J]. 弹道学报, 1998, 10(2): 78-98.
    Zhang J L, Lu H N, Ren S M. The Dynamic Response Error in Chamber Pressure Measurement [J]. Journal of Taiyuan Institute of Machinery, 1993, (1): 22-26. (in Chinese)
    张记龙, 陆宏年, 任树梅. 武器膛压测试传感器动态响应误差分析方法 [J]. 太原机械学院学报, 1993, (1): 22-26.
    Kong D R, Zhu M W, Shen A P, et al. Dynamical Characteristics Analysis of Copper Cylinder Crusher Gauge and Computer Simulation [J]. Initiators Pyrotechnics, 2001, (2): 27-30. (in Chinese)
    孔德仁, 朱明武, 申爱平, 等. 铜柱测压器动态特性分析及计算机仿真 [J]. 火工品, 2001, (2): 27-30.
    Kang L J, Yang J H. Selection of Resistance Strain Gauge [J]. Weighing Apparatus, 2004, 33(6): 9-10. (in Chinese)
    康鲁杰, 杨继红. 电阻应变片的选用 [J]. 衡器, 2004, 33(6): 9-10.
    Han Q G, Ma H A, Li R, et al. The Criterion for Crack of Tungsten Carbide Anvil Based on Finite Element Method [J]. Chinese Journal of High Pressure Physics, 2010, 24(1): 1-5. (in Chinese)
    韩奇钢, 马红安, 李瑞, 等. 基于有限元法确立碳化钨顶锤的破裂判据 [J]. 高压物理学报, 2010, 24(1): 1-5.
    Li J G. Design on Structure of Low Scale Pressure Sensor of Strain Type [J]. Journal of Southwest University of Science and Technology, 2006, 21(2): 63-65. (in Chinese)
    李俊国. 一种小量程应变式压力传感器结构设计 [J]. 西南科技大学学报, 2006, 21(2): 63-65.
    Zhai X Y, Ma J K, Lu C H. An Investigation of the Characteristic of Strain Transduces for Measuring Oil Film Pressure [J]. Lubrication Engineering, 2006, (4): 113-118. (in Chinese)
    翟宵雁, 马金奎, 路长厚. 应变式油膜压力测量传感器特性研究 [J]. 润滑与密封, 2006, (4): 113-118.
    Qiao X G, Li T, Wang H L, et al. Study on the Resistance-Strain-Gage Pressure Sensor [J]. Sensor World, 2006, 12(11): 11-13. (in Chinese)
    乔学光, 李婷, 王宏亮, 等. 电阻应变式压力传感器的研究 [J]. 传感器世界, 2006, 12(11): 11-13.
    Cao L, Kim T S, Zhou J, et al. Calibration Technique for MEMS Membrane Type Strain Sensors [A]//Proceedings of the IEEE Symposium on Microelectronics [C]. Minneapolis, USA, 1999: 204-210.
    Zhao Y L, Zhao L B, Jiang Z D. A Novel High Temperature Pressure Sensor on the Basis of SOI Layers [J]. Sens Actuators A, 2003, 108(1-3): 108-111.
    Feng Y J. MEMS Capacitive Strain Sensor [J]. Chinese Journal of Scientific Instrument, 2008, 29(3): 629-632. (in Chinese)
    冯勇建. MEMS电容应变传感器 [J]. 仪器仪表学报, 2008, 29(3): 629-632.
    Zheng X X, Liu Z Q, Wang R B, et al. Measurement of Shock Wavefront Produced by Ejecta Loading Device [J]. Chinese Journal of High Pressure Physics, 2004, 18(2): 188-192. (in Chinese)
    郑贤旭, 刘振清, 王荣波, 等. 微喷加载装置中爆轰波阵面的测量 [J]. 高压物理学报, 2004, 18(2): 188-192.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views(7972) PDF downloads(564) Cited by()
    Proportional views
    Related

    Copyright©《高压物理学报》编辑部

    Tel:0816-2490042 E-mail:gaoya@caep.cn

    Shu ICP, 11011126 -2

    Supported by: Beijing Renhe Information Technology Co. Ltd support: info@rhhz.net  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return