Comparison of Impact Damage between Ceramic Structure and Nacre-Like Ceramic/Polyurea Composite Structure
-
摘要: 建立了陶瓷梁受平头弹撞击的有限元模型，模拟了其冲击损伤演化过程，模拟结果与实验结果吻合较好，验证了模型的合理性。在此基础上，建立了仿珍珠母陶瓷/聚脲复合梁受相同弹体撞击的有限元模型，将其损伤演化过程与陶瓷梁进行了对比，并且分析了弹体撞击速度对两者损伤过程的影响。结果表明：在高速撞击下，陶瓷梁的损伤呈锥状扩展，梁发生整体性破坏，而仿珍珠母复合梁的损伤沿纵向（冲击方向）呈圆柱状扩展，梁发生局部性破坏，能更好地保持结构完整性；随着弹体撞击速度的增加，陶瓷梁的损伤范围加大，损伤程度加剧，而仿珍珠母复合梁的损伤范围在撞击速度高于一定值后变化不大，仅损伤程度增加。Abstract: The finite element model of a ceramic beam impacted by a blunt-nosed projectile was established, and the impact damage evolution process of the beam was simulated. The simulation results are in good agreement with experimental results, which confirms the validity of the model. On this basis, the finite element model of a nacre-like ceramic/polyurea composite beam impact by the same projectile was established. Its damage evolution process was compared with that of the ceramic beam. Effects of impact velocity of projectile on damage process are studies for the two beams. The obtained results show that the damage of the ceramic beam expands conically, and the beam undergoes global damage. The damage of the nacre-like composite beam expands in a cylindrical shape in the longitudinal direction (i.e., impact direction), and the beam undergoes local damage, which gives a good ability to maintain structural integrity. Moreover, as the impact velocity of the projectile increases, the range and extent of damage of the ceramic beam increases significantly. Differently, when the impact velocity exceeds a certain value, the damage range of the nacre-like composite beam changes insignificantly, while its damage extent grows with the increase of impact velocity.
-
Key words:
- impact /
- ceramic /
- nacre-like /
- polyurea /
- damage evolution
-
图 3 30
${\text{μ}}{\rm{s}}$ 时梁的损伤云图Figure 3. Damage contours of beams at 30
${\text{μ}}{\rm{s}}$ 
图 4 梁背面中心点的z向正应力(σz)的时程曲线
Figure 4. History curves of normal stress in z-direction (σz) for center point on back face of beams
ρ/(kg·m–3) A/MPa B/MPa n C 7 830 792 510 0.26 0.014 
下载: 导出CSV
-
[1] 江洁, 董侠, 陈美玉, 等. 现代防弹材料 [J]. 材料导报, 2013, 27(6): 70–76.JIANG J, DONG X, CHEN M Y, et al. A review of modern bulletproof materials [J]. Materials Reports, 2013, 27(6): 70–76. [2] 孙志杰, 吴燕, 张佐光, 等. 防弹陶瓷的研究现状与发展趋势 [J]. 宇航材料工艺, 2005(5): 10–14. doi: 10.3969/j.issn.1007-2330.2005.02.003SUN Z J, WU Y, ZHANG Z G, et al. Current status and development of ballistic ceramics [J]. Aerospace Materials & Technology, 2005(5): 10–14. doi: 10.3969/j.issn.1007-2330.2005.02.003 [3] 王振兴, 原梅妮, 李立州, 等. 贝壳珍珠母增韧机理研究进展 [J]. 材料导报, 2015, 29(8): 98–102.WANG Z X, YUAN M N, LI L Z, et al. Research progress of toughening mechanisms of nacre shell [J]. Materials Reports, 2015, 29(8): 98–102. [4] GRUJICIC M, SNIPES J S, RAMASWAMI S. Ballistic impact behavior of nacre-like laminated composites consisting of B4C tablets and polyurea matrix [J]. Journal of Materials Engineering & Performance, 2016, 25(3): 977–994. [5] GRUJICIC M, RAMASWAMI S, SNIPES J. Computational investigation of ballistic-impact behavior and penetration resistance of a nacre-like ceramic/polymer laminated composite [J]. International Journal of Structural Integrity, 2017, 8(1): 79–107. doi: 10.1108/IJSI-09-2015-0041 [6] WU K J, ZHENG Z J, ZHANG S S, et al. Interfacial strength-controlled energy dissipation mechanism and optimization in impact-resistant nacreous structure [J]. Materials & Design, 2019, 163: 107532. [7] WANG Z G, SUN Y Y, WU H, et al. Low velocity impact resistance of bio-inspired building ceramic composites with nacre-like structure [J]. Construction and Building Materials, 2018, 169: 851–858. doi: 10.1016/j.conbuildmat.2018.03.043 [8] GU G X, TAKAFFOLI M, HSIEH A J, et al. Biomimetic additive manufactured polymer composites for improved impact resistance [J]. Extreme Mechanics Letters, 2016, 9: 317–323. doi: 10.1016/j.eml.2016.09.006 [9] FLORES-JOHNSON E A, SHEN L M, GUIAMATSIA I, et al. A numerical study of bioinspired nacre-like composite plates under blast loading [J]. Composite Structures, 2015, 126: 329–336. doi: 10.1016/j.compstruct.2015.02.083 [10] HAYNES A, REINHARDT L, LIM C. Design and processing of alumina plate composites for ballistic nacre alumina structures [J]. Processing and Manufacturing, 2018, 3(18): 957–962. [11] YIN Z, HANNARD F, BARTHELAT F. Impact-resistant nacre-like transparent materials [J]. Science, 2019, 364(6447): 1260–1263. doi: 10.1126/science.aaw8988 [12] RIOU P, DENOUAL C, COTTENOT C E. Visualization of the damage evolution in impacted silicon carbide ceramics [J]. International Journal of Impact Engineering, 1998, 21(4): 225–235. doi: 10.1016/S0734-743X(97)00018-3 [13] JOHNSON G R, COOK W H. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures [C]//7th International Symposium on Ballistics. Hague, Netherlands, 1983: 541–547. [14] CRONIN D S, BUI K, KAUFMANN C, et al. Implementation and validation of the Johnson-Holmquist ceramic material model in LS-DYNA [C]//4th European LS-DYNA Users Conference. Ulm, Germany, 2004: 47–60. [15] MOHOTTI D, ALI M, NGO T, et al. Strain rate dependent constitutive model for predicting the material behaviour of polyurea under high strain rate tensile loading [J]. Materials & Design, 2014, 53: 830–837. -
下载:
点击查看大图
图(5) / 表(2)
计量
- 文章访问数: 6629
- HTML全文浏览量: 3046
- PDF下载量: 42
