-
摘要: 理论分析高速杆式射流侵彻半无限靶过程时,考虑速度梯度对聚能射流的影响,将射流进行分段计算,得到了射流拉伸后实际碰靶时的微元长度和直径变化。采用伯努利方程和静力学方法,通过对射流形状和速度分布作线性近似,理论分析了高速杆式射流侵彻半无限靶的过程,得到了靶体中的侵彻深度和侵彻孔径与射流长度、速度及直径之间的关系。将模拟结果与实验结果进行对比,结果表明理论分析结果与侵彻实验结果符合较好。Abstract: When analyzing the penetration of a rod-shaped projectile in semi-infinite target, the velocity gradient of the shaped charge jet is taken into account. The jet is divided into a series of segments, and the variations of the length and diameter of each jet segment are calculated at the moment of impacting on the target. Through the Bernoulli equation, linear approximations of velocity and diameter of the jet, and static method, the relationship between penetration depth and hole diameter in the target and impacting jet is obtained. Moreover, the simulated results are in quite good agreement with the experimental data.
-
Key words:
- rod-shaped projectile /
- penetration /
- semi-infinite target /
- penetration depth /
- penetration diameter
-
Ma X Q. Impact Dynamics [M]. Beijng: Beijing Institute of Technology Press, 1992: 371. (in Chinese) 马晓青. 冲击动力学 [M]. 北京: 北京理工大学出版社, 1992: 371. Wang L L. Foundation of Stress Waves [M]. Beijing: National Defence Industry Press, 2005: 233. (in Chinese) 王礼立. 应力波基础 [M]. 北京: 国防工业出版社, 2005: 233. Li C B, Pei M J, Shen Z W, et al. Influence of Initiation Way on the Formation and Armor-Piercing Performance of the Rod Projectile [J]. Chinese Journal of Explosives Propellants, 2006, 29(3): 47-51. (in Chinese) 李成兵, 裴明敬, 沈兆武, 等. 起爆方式对杆式弹丸成型和穿甲的影响 [J]. 火炸药学报, 2006, 29(3): 47-51. Ma X Q, Han F. High-Speed Impact Dynamics [M]. Beijing: National Defence Industry Press, 1998. (in Chinese) 马晓青, 韩峰. 高速碰撞动力学 [M]. 北京: 国防工业出版社, 1998. Sui S S, Wang S S. Terminal Effects [M]. Beijing: National Defence Industry Press, 2000. (in Chinese) 隋树元, 王树山. 终点效应学 [M]. 北京: 国防工业出版社, 2000.
点击查看大图
计量
- 文章访问数: 8026
- HTML全文浏览量: 523
- PDF下载量: 469